|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 10 posts ] |
|
Author |
Message |
boucher
|
Post subject: Oil pump gear Posted: Fri Jan 19, 2018 3:57 am |
|
Joined: Wed Nov 17, 2010 5:45 am Posts: 391
|
Hi Ducati knowledge people, does a Ducati f1 dry clutch share a different oil pump gear? The pantah pump gear is 44T The primary drive is 22T. The f1 is 30T on primary drive. What do I need for the oil pump gear (no of teeth/model) Thanks Boucher.
|
|
Top |
|
![](images/spacer.gif) |
flattop900
|
Post subject: Re: Oil pump gear Posted: Fri Jan 19, 2018 9:31 am |
|
Joined: Tue Mar 18, 2014 10:03 am Posts: 364
|
Good morning Mr.Boucher... I asked the same question earlier this year. The number MikeV posted was 58. Search "oil pump" and you will see other combinations that Mike posted. I found it easier and just as economical to purchase the entire pump assembly. Regards... Flattop
|
|
Top |
|
![](images/spacer.gif) |
ducttf1
|
Post subject: Re: Oil pump gear Posted: Fri Jan 19, 2018 11:56 am |
|
Joined: Sun Aug 08, 2010 8:03 pm Posts: 1160 Images: 0
|
Also note that the early pantah oil pump housings will not clear the later straight cut gears that are a larger diameter. You will see that all the later pump housings have a crescent shaped notch machined on the top of the them to clear the gear. Lou
|
|
Top |
|
![](images/spacer.gif) |
618F1
|
Post subject: Re: Oil pump gear Posted: Fri Jan 19, 2018 12:40 pm |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1814
|
Look for the March 22, 2017 postings in tt2 technical section Boucher, started by flattop.
MikeV
|
|
Top |
|
![](images/spacer.gif) |
618F1
|
Post subject: Re: Oil pump gear Posted: Fri Jan 19, 2018 12:40 pm |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1814
|
Look for the March 22, 2017 postings in tt2 technical section Boucher, started by flattop.
MikeV
|
|
Top |
|
![](images/spacer.gif) |
flattop900
|
Post subject: Re: Oil pump gear Posted: Fri Jan 19, 2018 12:54 pm |
|
Joined: Tue Mar 18, 2014 10:03 am Posts: 364
|
That's something else I never noticed about the oil pumps. First one early hand ground for clearance. Second one machined. Third one cast. So with all these revisions going on, are the internal gears all going to be the same? Regards... Flattop
Attachments: |
![oil pumps.JPG](./download/file.php?id=7674&t=1&sid=4875f38e26d3a899911a5e39bd2c965c)
oil pumps.JPG [ 4.36 MiB | Viewed 3324 times ]
|
|
|
Top |
|
![](images/spacer.gif) |
ducttf1
|
Post subject: Re: Oil pump gear Posted: Fri Jan 19, 2018 3:06 pm |
|
Joined: Sun Aug 08, 2010 8:03 pm Posts: 1160 Images: 0
|
As always, when in doubt ask Mike V! Lou
|
|
Top |
|
![](images/spacer.gif) |
boucher
|
Post subject: Re: Oil pump gear Posted: Fri Jan 19, 2018 5:20 pm |
|
Joined: Wed Nov 17, 2010 5:45 am Posts: 391
|
So I'm after a oil pump with a 58t to run against the 30t primary drive. Thanks Boucher.
|
|
Top |
|
![](images/spacer.gif) |
618F1
|
Post subject: Re: Oil pump gear Posted: Fri Jan 19, 2018 8:51 pm |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1814
|
|
Top |
|
![](images/spacer.gif) |
Palmer
|
Post subject: Re: Oil pump gear Posted: Mon Jan 22, 2018 11:00 am |
|
Joined: Mon Oct 04, 2010 7:47 am Posts: 104 Images: 0
|
From experience, try and keep the primary and oil pump gears as an original set, swapping gears can sometimes generate a LOT of engine noise even thought the gear teeth look identical.
Palmer
|
|
Top |
|
![](images/spacer.gif) |
|
Page 1 of 1
|
[ 10 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 7 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|