|
View unanswered posts | View active topics
Author |
Message |
618F1
|
Post subject: Re: Bitsa in the guise of a TT2 Posted: Wed Jun 28, 2017 3:01 pm |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1811
|
Hello Sam. Do you mean the brackets welded to the frame to hold the aluminum frame plates? Is that what you need? MikeV
|
|
Top |
|
![](images/spacer.gif) |
Sam
|
Post subject: Re: Bitsa in the guise of a TT2 Posted: Wed Jun 28, 2017 3:23 pm |
|
Joined: Mon Dec 13, 2010 4:50 am Posts: 87 Images: 1 Location: Scotland
|
Yes Mike correct, as far as I can see from pics there is one roughly half way down the diagonal tube from the steering head to front engine mount and another maybe up a third from the rear engine mount, not sure about the front side mounts though. If I remember correctly ive seen two bosses welded just in front of the fuel tank, is that a mount for the fairing as well ? do you have a pic of the front stay/support from the head stock ? Lastly what size of alloy flat bar is used for the stays.
Thank you in advance Sam
_________________ Wha's Like Us?
Damn Few And They're A' Died!
|
|
Top |
|
![](images/spacer.gif) |
618F1
|
Post subject: Re: Bitsa in the guise of a TT2 Posted: Thu Jun 29, 2017 1:15 am |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1811
|
OK. Give us a few days. Somewhere on here are the dimensions of the TT2 fairings stays. Try the search button and see what you can find there in the meantime. MikeV
|
|
Top |
|
![](images/spacer.gif) |
Sam
|
Post subject: Re: Bitsa in the guise of a TT2 Posted: Thu Jun 29, 2017 2:14 am |
|
Joined: Mon Dec 13, 2010 4:50 am Posts: 87 Images: 1 Location: Scotland
|
618F1 wrote: OK. Give us a few days. Somewhere on here are the dimensions of the TT2 fairings stays. Try the search button and see what you can find there in the meantime. MikeV Cheers Mike, I did try and do a search but brought up all sorts, maybe using the incorrect wording. Sam
_________________ Wha's Like Us?
Damn Few And They're A' Died!
|
|
Top |
|
![](images/spacer.gif) |
Sam
|
Post subject: Re: Bitsa in the guise of a TT2 Posted: Thu Jun 29, 2017 12:51 pm |
|
Joined: Mon Dec 13, 2010 4:50 am Posts: 87 Images: 1 Location: Scotland
|
Hi Mike, I found the drawings of the brackets cheers ! next what thickness and width of ally is used ?
_________________ Wha's Like Us?
Damn Few And They're A' Died!
|
|
Top |
|
![](images/spacer.gif) |
Sam
|
Post subject: Re: Bitsa in the guise of a TT2 Posted: Sat Jul 01, 2017 12:07 pm |
|
Joined: Mon Dec 13, 2010 4:50 am Posts: 87 Images: 1 Location: Scotland
|
Electronic bling arrived this morning micro switch gear electronic rev counter / speedo and M-unit blue. https://youtu.be/dmexjVEZ2q8 Attachment:
20170701_145729.jpg [ 2.13 MiB | Viewed 1359 times ]
_________________ Wha's Like Us?
Damn Few And They're A' Died!
|
|
Top |
|
![](images/spacer.gif) |
ducttf1
|
Post subject: Re: Bitsa in the guise of a TT2 Posted: Sat Jul 01, 2017 12:20 pm |
|
Joined: Sun Aug 08, 2010 8:03 pm Posts: 1156 Images: 0
|
That Moto Gadget stuff is top quality! Have fun! Lou
|
|
Top |
|
![](images/spacer.gif) |
618F1
|
Post subject: Re: Bitsa in the guise of a TT2 Posted: Sat Jul 01, 2017 12:43 pm |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1811
|
What are the two small aluminum rings with wires on them used for? What is this I see here? MikeV
|
|
Top |
|
![](images/spacer.gif) |
Sam
|
Post subject: Re: Bitsa in the guise of a TT2 Posted: Sat Jul 01, 2017 1:11 pm |
|
Joined: Mon Dec 13, 2010 4:50 am Posts: 87 Images: 1 Location: Scotland
|
I shall be using the bike on the twisty back roads of Scotland so need lights and indicators. ![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
_________________ Wha's Like Us?
Damn Few And They're A' Died!
|
|
Top |
|
![](images/spacer.gif) |
Sam
|
Post subject: Re: Bitsa in the guise of a TT2 Posted: Sat Oct 21, 2017 8:07 am |
|
Joined: Mon Dec 13, 2010 4:50 am Posts: 87 Images: 1 Location: Scotland
|
I picked up my motor yesterday from Paul Klatkiewicz of DTS down in Wakefield. My woirk load for the next 6 months or so would not have freed up enought time to get the TT done for the Moidart run end of April 2018 and thought this would be the easiest and quickest option. Full rebuild including new big end shells ,big end bolts main bearings, gas flowed heads , exhaust valves and guides lightweight flywheel (saving of 900g) with Sachse digital ignition. I had already made a start on the motor by soda blasting the cases heads and barrels also polishing the outer covers prior to de-greasing. Looks good enough to sit in the lounge. Attachment:
20171020_182643.jpg [ 2.17 MiB | Viewed 1216 times ]
Attachments: |
![20171020_182631.jpg](./download/file.php?id=7446&t=1&sid=5d1b13ab0c97740e4541c7cdd7bf350d)
20171020_182631.jpg [ 2.04 MiB | Viewed 1216 times ]
|
_________________ Wha's Like Us?
Damn Few And They're A' Died!
|
|
Top |
|
![](images/spacer.gif) |
Who is online |
Users browsing this forum: No registered users and 127 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|