Good work! Go Filippo!
| Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
| BirTTh day http://ducatittandf1.com/viewtopic.php?f=27&t=12232 |
Page 7 of 9 |
| Author: | 583 [ Mon Nov 27, 2023 3:07 am ] |
| Post subject: | Re: BirTTh day |
Thank you MikeV fir your kind words- unfortunately is not my job, i would like to have the 20% of the skills this guys have. Filippo |
|
| Author: | Carlo [ Mon Nov 27, 2023 4:11 pm ] |
| Post subject: | Re: BirTTh day |
Good work! Go Filippo!
|
|
| Author: | 583 [ Sat Dec 16, 2023 1:44 pm ] | |||
| Post subject: | Re: BirTTh day | |||
It is always a pleasure to came to Carlo'workshop, and i'm lucky beacause i only need 1 hour drive. Carlo's workshop is a mine of wonders We had a very good talk together on bikes and projects. I then take the chance to drive home with a marzocchi M1r38mm machined by Carlo and the related brembo p08 adaptors. Thank you Carlo Filippo
|
||||
| Author: | 583 [ Sat Dec 16, 2023 2:01 pm ] | |||||||
| Post subject: | Re: BirTTh day | |||||||
We are making huge progress on The engine side. Again thank to Roberto and Tullio for theyr amazing job. Try to use the st2 beltshaft to install the external ignition but at the end we managed to machining a brand newmone semCarter is lighter than the original Ciao Filippo
|
||||||||
| Author: | 618F1 [ Sun Dec 17, 2023 11:23 am ] |
| Post subject: | Re: BirTTh day |
Well this is very unique to see. Impressive. Better than using a DREMEL tool. Q: Do Carlo’s caliper adapters change the size of the discs you will use or just locate the calipers lower? Won’t the calipers bolt directly to the sliders using 280mm discs easily? Or is something a different bolt spacing? MikeV |
|
| Author: | 583 [ Sun Dec 17, 2023 4:43 pm ] | ||||
| Post subject: | Re: BirTTh day | ||||
Hi MikeV thank you for reply. I will forward to the "team" your congrats, they really are doing an awesome job. Carlo's adaptors are for 280mm disk and allow to install P08 calipers. My issue is to install Federiconi wheel , these have a narrow the main hub (in comparison with the stock Alazzurra Pantah), so i will need to do spacer on the wheel to set all the pieces together. i will more precise on the above when we will start to play with wheel setting. Twin spark setting
|
|||||
| Author: | Carlo [ Thu Dec 21, 2023 3:15 am ] |
| Post subject: | Re: BirTTh day |
Ciao Filippo, The forks that Filippo has are M1r 38, but they are not the same as the normal Ducati forks. Theoretically, neither the P08 nor the P05 calipers can be mounted, but with the adapter that Filippo has, I managed to mount the P08. The adapters I have are not right for M1r Ducati, to adapt from P05 to P08 |
|
| Author: | 618F1 [ Thu Dec 21, 2023 6:08 pm ] |
| Post subject: | Re: BirTTh day |
Thanks for that reply Carlo. Now I understand. The kit looks good. MikeV |
|
| Author: | 583 [ Tue Feb 27, 2024 2:20 pm ] | |||||
| Post subject: | Re: BirTTh day | |||||
Hi all Slowly but proceeding. Sanded the frame to apply a coat of epoxy primer. The frame once Sanded look very good. What about to chrome it.? Not for this project but fully polished or even chromed will look amazing. Filippo
|
||||||
| Author: | 618F1 [ Sat Mar 02, 2024 12:32 am ] |
| Post subject: | Re: BirTTh day |
We know you are proud of this. But if you make it too shiny the paint won’t stick. MikeV |
|
| Page 7 of 9 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|