Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://ducatittandf1.com/

front forks
http://ducatittandf1.com/viewtopic.php?f=26&t=4450		 Page 1 of 1
Author:  shane [ Sat Sep 01, 2012 6:20 am ]
Post subject:  front forks
hi i am building a bevel twin race bike and was wondering if a set of M1R 41.7mm front forks are much better than a set of 38mm marrzocchis with works performance internals which i was planning to use.
cheers
shane
Author:  kentswe [ Mon Sep 03, 2012 3:42 pm ]
Post subject:  Re: front forks
they are better if you set them up properly.
As you have to do with all forks.
I used a set on a bot racer in the eighties and by that time it worked fine after some dribbling with oilweight and airgap.
Cant remember how much and so.

But i have cnc yokes for the bevels if you are interested,also 41,7 for the M1r.
Fits straight in.

Aswell as some magnesiumparts,i race bevels myself.
You can get some pics etc if you email me at
kent.jornevall@swipnet.se

Best regards
Kent

Attachments:
20120415215.jpg
20120415215.jpg [ 505.94 KiB | Viewed 3324 times ]
Author:  Dick le Dog [ Thu Sep 06, 2012 3:55 am ]
Post subject:  Re: front forks
http://www.maxtonsuspension.co.uk/

The best
Author:  Wolf [ Tue Sep 18, 2012 1:46 pm ]
Post subject:  Re: front forks
Hi Shane,

this firm is also a good recommendation for fork tuning:

http://www.hh-racetech.com/portal/Onlin ... fault.aspx

they brought my 38 Marzocchi to an up-to-date level. New linear springs, rebound and compression can now be adjusted. Works just fine!

Cheers

Wolf
Author:  shane [ Wed Sep 26, 2012 7:12 am ]
Post subject:  Re: front forks
hi thanks for your help cheers
Author:  pantah_good [ Wed Sep 26, 2012 8:30 am ]
Post subject:  Re: front forks
In the States, similar good suspension work is available at Cogent Dynamics http://www.motocd.com/cd/
Last week Robbie and I were down in NC to ride in the mountains. Tuesday was a wash out, so we visited Rick's shop in Asheville and picked up the Garage Find's completely reworked Fox shock. Rick has also reworked a set of M1R's with cartridges for the Adamo Tricolor racer. If you're in the U.S., we highly recommend him.
Bill
Edit: In the interest of full disclosure, I should add that Rick is a sponsor on Robbie's race bikes, but we work with him because he's very good.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/