Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
Ducati Pantah 600 SL press of compression. http://ducatittandf1.com/viewtopic.php?f=25&t=12079 |
Page 1 of 1 |
Author: | stelios62 [ Fri Feb 12, 2021 7:17 pm ] |
Post subject: | Ducati Pantah 600 SL press of compression. |
Hello every duc owner. For my Ducati Pantah 600 SL maintenance preparation, how many bars (or psi) is measured the compression pressure into cylinder when engine is rotate by electric starter and full throttle open ? This value is not refers into instruction Workshop Manual book. Thanks |
Author: | 618F1 [ Sat Feb 13, 2021 11:27 am ] |
Post subject: | Re: Ducati Pantah 600 SL press of compression. |
Cannot say with any certainty, but somewhere between 135 and 150 psi on a warm engine would probably be good —- readings within 5 psi on the pair. The latter is just as important. MikeV So what are you getting? |
Author: | Carlo [ Sun Feb 14, 2021 2:02 pm ] |
Post subject: | Re: Ducati Pantah 600 SL press of compression. |
hi, I believe that the most important thing is that the cylinders have the same pressure, of course not negligible, to have an acceptable pressure. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |