Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://ducatittandf1.com/

Pantah 600 1984
http://ducatittandf1.com/viewtopic.php?f=25&t=11996		 Page 1 of 2
Author:  583 [ Fri Apr 24, 2020 11:31 am ]
Post subject:  Pantah 600 1984
Hi everybody
I don't remember if i"ve never share on this site pics of my Pantah 600.
Don't know.
I do it now and to quote Carlo from an other topic:
"Ciao Filippo, grazie, speriamo di poter mettere in moto qualcosa quest'anno,"
Were "mettere in moto" means "turn on samething"
Well this is my attempt to the above widh/suggestion.
I find online these short Conti muffler in "brand new" condition and I did not resist to install and turn on the bike ..
https://youtu.be/V7wuMvM-g4k
Ciao
Filippo
Author:  Carlo [ Fri Apr 24, 2020 1:13 pm ]
Post subject:  Re: Pantah 600 1984
583 wrote:
Hi everybody
I don't remember if i"ve never share on this site pics of my Pantah 600.
Don't know.
I do it now and to quote Carlo from an other topic:
"Ciao Filippo, grazie, speriamo di poter mettere in moto qualcosa quest'anno,"
Were "mettere in moto" means "turn on samething"
Well this is my attempt to the above widh/suggestion.
I find online these short Conti muffler in "brand new" condition and I did not resist to install and turn on the bike ..
https://youtu.be/V7wuMvM-g4k
Ciao
Filippo


Ora si!!!!!!!!!!!! :D
Author:  583 [ Thu Apr 21, 2022 12:11 pm ]
Post subject:  Re: Pantah 600 1984
Hi everybody
It look like i'm becaming confident with t my bike.
Carlo already know about he problem on my bike, and I thake the chance to say to Carlo thank you again for be always available to give suggestion and help.

Shortly:
When the horizontal cylinder quit sparkling
Or randomly sparkling I supposed being the pickup. Following after a brief inspection

Attachments:
20220420_212640.jpg
20220420_212640.jpg [ 324.79 KiB | Viewed 13667 times ]
Author:  ducttf1 [ Thu Apr 21, 2022 6:00 pm ]
Post subject:  Re: Pantah 600 1984
Not an unfamiliar picture!! Good luck, and yes Carlo is the MAN! Lou
Author:  flattop900 [ Sat Apr 23, 2022 11:50 pm ]
Post subject:  Re: Pantah 600 1984
Hello Filippo...
That is the problem, but what is the cause?
P.S. Dish washing gloves are the best.
Regards....
Flattop.
Author:  583 [ Mon Apr 25, 2022 4:46 am ]
Post subject:  Re: Pantah 600 1984
Hi lou and Flattopp
More pics.
Yes dish Washing gloves are a good alternative to latex gloves . Because I'm allergic to latex.;)

The cause is ,I belive, the pick-up wire were in touch with the main switch or as per manual remote control. "Teleruttore" in Italian.
And the n take a electrical/heat shock.
Filippo

Attachments:
20220420_212527.jpg
20220420_212527.jpg [ 374.26 KiB | Viewed 13556 times ]
Author:  Carlo [ Sun May 01, 2022 11:04 am ]
Post subject:  Re: Pantah 600 1984
Non devi ringraziarmi Filippo, รจ un Piacere!!!You don't have to thank me filippo it's a pleasure!
Author:  583 [ Sun Mar 19, 2023 12:44 pm ]
Post subject:  Re: Pantah 600 1984
https://youtube.com/shorts/S9VY8Eo1myc?feature=share

Dear all
After various attempts with after market alternative on pick up I moved to rewire the original bosch pick-up.
I'm happy about the result as per the above video. Start good and keeping low rate rpm.
Now I need to test the bike on the road and then I can focus on wich is the best pick-up alternative. I have to check for the availability of whole parts for a full kokusan ignition system
Ciao
Filippo
Author:  Cal [ Sun Mar 19, 2023 1:07 pm ]
Post subject:  Re: Pantah 600 1984
Hi Filippo,
I tried to watch your vid.....but couldnt see it, it said it was private. Hope all is well with you.

Clay
Author:  583 [ Sun Mar 19, 2023 3:21 pm ]
Post subject:  Re: Pantah 600 1984
Hi Clay
I'm fine , hope the same for you.
Thank yuo for the advise. I will check the video to solve the problem.
Filippo
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/