| Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
| Rear wheel mounting http://ducatittandf1.com/viewtopic.php?f=25&t=11472 |
Page 1 of 1 |
| Author: | DarmahDave [ Fri Dec 02, 2016 9:18 am ] |
| Post subject: | Rear wheel mounting |
I am in the process of doing a 17" wheel swap on my race Pantah. For the front I am using a cbr600rr front wheel, 3 spoke and it even has the proper sized bearings for the marzocchi axle! For the rear, (I didn't take cranky's advice, but I got a wheel, rotor, and sprocket for only $70), and went with a monster 620 3 spoke unit. The rear hub is pretty wide but with some machining it will be close to fitting. My question is this, can the rear wheel on a Pantah be fitted without using the 2 inner aluminum swingarm plates? The old roundcase 750 gt's used to mount their rear wheels in this manner using only two outer plates. Ditching the inner ones would give me a ton of extra room. Thanks Dave |
|
| Author: | 618F1 [ Tue Dec 06, 2016 8:04 pm ] |
| Post subject: | Re: Rear wheel mounting |
I guess with a race bike you can do anything that will work. I do know you can mill the plates much thinner, as on the TT900SS project. I had to do that for clearance. There is a photo somewhere in that thread Dave. MikeV PS: I could not find the photo! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|