DUCATI TT and F1 FORUM
 
It is currently Sat Nov 18, 2017 2:21 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 20 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: 2-1 right side
PostPosted: Fri Nov 13, 2015 3:23 am 
Offline

Joined: Sun May 08, 2011 12:17 pm
Posts: 279
Location: Europe
HI..
Anyone know of a builder to do this 2-1 ??? :?:

Regards.

Image


Top
 Profile  
 
 Post subject: Re: 2-1 right side
PostPosted: Fri Nov 13, 2015 11:46 pm 
Offline
User avatar

Joined: Sun Nov 28, 2010 4:13 am
Posts: 613
Images: 0
Location: Sydney, Australia
The exhaust RHS 2 -1 below has a stamp that says NCR. There are more pictures of the bike on the Internet that have close ups.

Now a segway to something else... ;)

The bike in the picture has a Verlicchi TT2 Pantah style chassis. The owner of this bike wants US$40k for it. He likes to describe it as having been made by NCR... (probably because the exhaust is stamped NCR) but basically it is a kit bike, and a nice one at that. Perhaps worth $10K?

Here is the same chassis wrapped with Allazurra body work. Reno Leoni and Jimmi Adamo.
Attachment:
images (1).jpg
images (1).jpg [ 12.4 KiB | Viewed 866 times ]

You can get a similar kit from Two Wheel Classics in the UK.
http://www.twowheelclassics.co.uk/catal ... assis.html
Attachment:
pantah-chassis-kit.png
pantah-chassis-kit.png [ 70.99 KiB | Viewed 866 times ]

_________________
Mike, Sydney Australia
https://www.facebook.com/groups/CarburetorTuningTool/


Last edited by athleticroman on Sat Nov 14, 2015 12:36 am, edited 2 times in total.

Top
 Profile Personal album  
 
 Post subject: Re: 2-1 right side
PostPosted: Sat Nov 14, 2015 12:12 am 
Offline
User avatar

Joined: Sun Nov 28, 2010 4:13 am
Posts: 613
Images: 0
Location: Sydney, Australia
Check out this fantastic project "Tribute to the Pantah F2 No. 8" by MikeV from 2011

Link --->>> viewtopic.php?f=25&t=180&hilit=pantah+TT+replica+isle+of+man+tony+rutter&start=40

The original TT winning bike with TT winner Tony Rutter (seated) and the supremo tuner behind Mike Hailwood's famous 1978 IOM TT1 win - Mr Patrick Slinn ;)
Attachment:
slinn_foto_135.jpg
slinn_foto_135.jpg [ 36.75 KiB | Viewed 865 times ]

Pat Slinn seated on the replica bike below.
Attachment:
slinn_foto_137.jpg
slinn_foto_137.jpg [ 62.13 KiB | Viewed 864 times ]


Attachments:
slinn_foto_136.jpg
slinn_foto_136.jpg [ 63.62 KiB | Viewed 864 times ]

_________________
Mike, Sydney Australia
https://www.facebook.com/groups/CarburetorTuningTool/
Top
 Profile Personal album  
 
 Post subject: Re: 2-1 right side
PostPosted: Sat Nov 14, 2015 3:22 am 
Offline

Joined: Sun May 08, 2011 12:17 pm
Posts: 279
Location: Europe
Hi Mike.
I know the history of 600NCR Pantah and also work MikeV. ;)
Image


I try to do something :)


Top
 Profile  
 
 Post subject: Re: 2-1 right side
PostPosted: Sat Nov 14, 2015 11:09 pm 
Offline

Joined: Sun Aug 08, 2010 8:03 pm
Posts: 698
Images: 0
Really nice machines. I hope I have this right. The frame that Reno and Jimmy have is a DM framed Ally. It was a very formidable machine with the ability to be twin or mono shock, both mounts included. The motor had twin plug heads and an NCR dry clutch. Pete Johnson would later take this same bike and win a championship (right Cranky?). The pipe that went under the motor was a prototype Supertrapp. Don't know if it worked that well. The NCR framed bike is mono shock only. It was available as a kit in the NCR catalog. Very light weight.The motor mounts are machined spools instead of just stamped steel and it has more bracing as well as being chrome/moly. Really beautifully made. Some of our Forum mates are building these up. Steve D'angelo has a DM model and Mike V has an NCR. Can't wait to see these done. As far as the one that is appearing on ebay, I agree, it was probably a kit, but it is nice that he has the NCR pipe and strangely the tank is aluminum, I thought they were fiberglass. The upper fairing looks funny cut away without the lower, personally I like it with the lower like in the picture from NCR. I think one of our many craftsmen on the Forum, Paul Huit, made a few of the seat tank kits for these frames. Lou


Attachments:
NCR_prospekt_8.jpg
NCR_prospekt_8.jpg [ 56.06 KiB | Viewed 815 times ]
get-attachment-11.aspx.jpeg
get-attachment-11.aspx.jpeg [ 75.26 KiB | Viewed 815 times ]
Top
 Profile Personal album  
 
 Post subject: Re: 2-1 right side
PostPosted: Sun Nov 15, 2015 6:53 am 
Offline

Joined: Sun May 08, 2011 12:17 pm
Posts: 279
Location: Europe
Hi Lou.

My project is not very ambitious, the laws in my country do not allow too many changes to street bikes.
The base is a Pantah 600, engine 650.
Tank and Seat, thanks to our friend Paul Hewitt ;)
upper fairing, very similar.. bought in Italy, requires some modifications.
For the front fender in wheel 18 "..I have not found alternatives in the market and I've made myself.

It's what's for now!! :)..... and waiting to find someone who makes or sells the exhaust.

Regards


Top
 Profile  
 
 Post subject: Re: 2-1 right side
PostPosted: Sun Nov 15, 2015 1:08 pm 
Offline
User avatar

Joined: Sat Oct 02, 2010 12:22 pm
Posts: 128
A pattern 2:1 exhaust was made by BUB in California (?) for a limited time. I had one on an Alazzurra thought it was very good but loud. I suspect anything new will have to be custom built since demand was tiny even in 1987.

ALSO: Lou, can you find a production date for those 3-spoke wheels from your interesting NCR catalogue or an availability date? I really like those Pantah era frames.

Thank you,

fmcd


Top
 Profile  
 
 Post subject: Re: 2-1 right side
PostPosted: Sun Nov 15, 2015 1:23 pm 
Offline

Joined: Thu Oct 14, 2010 11:23 am
Posts: 1122
Yes, I posted a while back about looking for one of these. Have never seen one for sale. I suspect it will have to be made special.

I am probably going to use my noisy F1 Verlicchi, because it actually looks great with that bodywork, and because it does have baffles (for the tech inspectors to see).

Grabbed one of Paul's tank/seat combos as soon as I saw what he had done; glad I did. I think the so-called "F1" fairing sold by Europlast (like on my TT900SS) is same as the NCR version for this frame.

MikeV


Top
 Profile  
 
 Post subject: Re: 2-1 right side
PostPosted: Sun Nov 15, 2015 2:11 pm 
Offline

Joined: Sun May 08, 2011 12:17 pm
Posts: 279
Location: Europe
618F1 wrote:
Yes, I posted a while back about looking for one of these. Have never seen one for sale. I suspect it will have to be made special.

MikeV


Bad news.. :? :?


Top
 Profile  
 
 Post subject: Re: 2-1 right side
PostPosted: Sun Nov 15, 2015 3:09 pm 
Offline

Joined: Sun Aug 08, 2010 8:03 pm
Posts: 698
Images: 0
I've never seen one of these on a bike, but I wonder if it is routed under the engine? Maybe a good start? Just a thought. Lou http://www.ebay.com/itm/Ducati-cagiva-a ... 6-&vxp=mtr


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL