Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
Slipper clutch on a 750F1 http://ducatittandf1.com/viewtopic.php?f=25&t=11165 |
Page 1 of 1 |
Author: | marcotoys [ Sun Jun 28, 2015 6:24 pm ] |
Post subject: | Slipper clutch on a 750F1 |
Hi All, Is it possible to install a slipper clutch on a 1985 750F1 engine ? What do I have to buy and where to make such a conversion ? I now use my F1 only for track days. So, it makes sense for me to make such a modification. Maybe a winter project ? Thanks for any advice, Gilles Lachance Québec City |
Author: | tvision321 [ Tue Jun 30, 2015 10:31 pm ] | ||
Post subject: | Re: Slipper clutch on a 750F1 | ||
You can use a modern slipper clutch on the old Pantah drive train, but you will need to use a different actuator mechanism since the clutch push rod doesn't come from the left side of the case. Redfox sells a set up ready to go but it is not cheap. If your handy, you could also fabricate one if you like. http://www.redfox-grinta.com/ cheers, Tom
|
Author: | brad black [ Wed Jul 01, 2015 8:07 am ] |
Post subject: | Re: Slipper clutch on a 750F1 |
mmmmmmmm. me wanty. i couldn't see just the cable actuator assembly on their site, but i'm afraid to email and ask |
Author: | tvision321 [ Wed Jul 01, 2015 3:59 pm ] |
Post subject: | Re: Slipper clutch on a 750F1 |
Yes it is a very tasty item. It's not listed on their website, but email Jan and he'll tell you the specs and prices. You should sit down for the telephone call. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |