| Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
| Speedo runs backwards http://ducatittandf1.com/viewtopic.php?f=24&t=12000 |
Page 1 of 1 |
| Author: | MarcFX [ Sat May 09, 2020 7:12 pm ] |
| Post subject: | Speedo runs backwards |
well M1R front end is in and the brake callipers lined up, new problem speedo runs backward. Dash is of unknown (I cant remember origin) my thoughts are that it is off 400 or something that has the speedo drive on the other side, any thoughts on how to change it apart from replacing it. Best regards Marc Attachment: IMG_2310.jpg [ 114.41 KiB | Viewed 15296 times ] |
|
| Author: | 618F1 [ Sun May 10, 2020 10:27 am ] |
| Post subject: | Re: Speedo runs backwards |
You have the problem pegged Marc. Not sure what side your speedo wheel drive is on now, but a (simple?) swap to the other side will work. If the cable was coming off the top of the axle, like on the F1, then placing it in the bottom left will work. You may have to drill a small hole in the wheel hub, and dink around with axle spacers and the cable holder, but it works. Did this to my F1. Then when you want to sell your bike you swap it back for a while to lower the mileage —-ha ha. MikeV Reread and looked at the post after the second cup of coffee. Just reverse everything I said. You have original F1 speedo, I think, and left side speedo drive placement. |
|
| Author: | Cal [ Sun May 10, 2020 11:10 am ] |
| Post subject: | Re: Speedo runs backwards |
Hi, Out of curiosity, what is that instrument cluster off of?? I didnt realize any 2 valve ducati had an 11k redline on the tach. Can anybody ID it?? Clay |
|
| Author: | 618F1 [ Sun May 10, 2020 11:43 am ] |
| Post subject: | Re: Speedo runs backwards |
They are out there Cal, from the 400s, and maybe the 888s. The 400s run off the right side of the wheel, And the later engines off the left. I have one or two. MikeV I am fairly certain that the. 851/888s has 10K tachs, and maybe for racing they went to an 11K version. I suspect a 4-valve expert/owner would know. Honestly, a stock F1 is out of breath at 8K. And the last K is only for over-rev. |
|
| Author: | Cal [ Sun May 10, 2020 12:09 pm ] |
| Post subject: | Re: Speedo runs backwards |
618F1 wrote: They are out there Cal, from the 400s, and maybe the 888s. The 400s run off the right side of the wheel, And the later engines off the left. I one or two. MikeV Wow....I didnt realize any 400 or even 851/888 had an 11k redline instrument, 2k higher than an F1 |
|
| Author: | MarcFX [ Sun May 10, 2020 6:44 pm ] |
| Post subject: | Re: Speedo runs backwards |
Thanks for the help, I could swap sides with the speedo drive, but, puts cable on the wrong side of the guard for the rubber cable guide, might have to be another speedo. Or how about if I use Veglia angled gearbox as used on Guzzi, will that re reverse the reverse? |
|
| Author: | 618F1 [ Sun May 10, 2020 7:50 pm ] |
| Post subject: | Re: Speedo runs backwards |
Then any of these late 80s thru 90s bikes ( pasos-sports-supersports-888 ) will work. MikeV |
|
| Author: | MarcFX [ Wed Jun 24, 2020 1:40 am ] |
| Post subject: | Re: Speedo runs backwards |
Changed dash to 900 dash and still have same issue, any other thoughts, speedo drive is all I have left to change. It is off Pantah which may not be helping |
|
| Author: | 618F1 [ Wed Jun 24, 2020 10:15 am ] |
| Post subject: | Re: Speedo runs backwards |
I am perplexed. If speedo drive is on left and speedo clock is 900 then it should work. I switched my F1 from right hand drive coming off top of axle to left hand coming off bottom (using the same drive) and it solved the problem. I still say flopping it to the other side will work. Can you post a side view of the wheel with the drive? Seeing the actual drive might help. MikeV Look at pages 4 and 5 of the Laguna Seca clone: 900ss dash; M1Rs; Paso fender; and old-style Veglia speedo drive on the left side coming off the bottom of axle. Same as my F1. MikeV |
|
| Author: | MarcFX [ Thu Jul 02, 2020 8:27 pm ] |
| Post subject: | Re: Speedo runs backwards |
618F1 wrote: I am perplexed. If speedo drive is on left and speedo clock is 900 then it should work. I switched my F1 from right hand drive coming off top of axle to left hand coming off bottom (using the same drive) and it solved the problem. I still say flopping it to the other side will work. Can you post a side view of the wheel with the drive? Seeing the actual drive might help. MikeV Look at pages 4 and 5 of the Laguna Seca clone: 900ss dash; M1Rs; Paso fender; and old-style Veglia speedo drive on the left side coming off the bottom of axle. Same as my F1. MikeV Hi Mike, thanks for your help, I think my next move is to use 900ss speedo drive on left side and that eliminates all the variables. I have plenty of space in there because of the M1Rs, so if in doubt change the lot, best regards Marc |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|