Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
Innovative sidestand??? http://ducatittandf1.com/viewtopic.php?f=24&t=11703 |
Page 1 of 1 |
Author: | pantah_good [ Sat Dec 23, 2017 8:49 pm ] |
Post subject: | Re: Innovative sidestand??? |
Where's the center stand? They don't look right on anything else. |
Author: | Cal [ Sun Dec 24, 2017 11:37 am ] | ||
Post subject: | Re: Innovative sidestand??? | ||
pantah_good wrote: Where's the center stand? They don't look right on anything else. Cant do center stand, frame has been TT'd/cleaned up. Frame lowers and exhaust/passenger mounts have been clipped off. This may have saved some weight, , but I think it was necessary to clear for tt pipe and low battery tray.
|
Author: | 618F1 [ Sun Dec 24, 2017 12:10 pm ] |
Post subject: | Re: Innovative sidestand??? |
Yep, that battery tray uses the engiine lugs that might work. Whatever you do will be very “custom”. Do like the redneck sidestand though. MikeV |
Author: | pantah_good [ Sun Dec 24, 2017 5:01 pm ] |
Post subject: | Re: Innovative sidestand??? |
In that case then the Team Ducati plank is clearly the best choice. Just don't forget to leave it in first. slicks on the street....my my... |
Author: | Cal [ Tue Dec 26, 2017 12:56 am ] |
Post subject: | Re: Innovative sidestand??? |
pantah_good wrote: In that case then the Team Ducati plank is clearly the best choice. Just don't forget to leave it in first. slicks on the street....my my... Yeah.....the slicks have to go, they are actually almost new 30 year old slicks that were on the bike when I bought it. Looked like they only had a couple of laps on them. I figued I could get by with these to see if/how the bike runs as long as I am just doing slow test/tuning runs (they are probably pretty dangerous) The good problem that I have now is that I have run the bike a handful of times and it is running really great.....I need some new tires. |
Author: | TheClaw [ Mon Jan 01, 2018 10:44 pm ] | |||
Post subject: | Re: Innovative sidestand??? | |||
I have a stock sidestand laying around but this bike came with it's own homemade one.
|
Author: | Cal [ Thu Jan 04, 2018 11:15 am ] |
Post subject: | Re: Innovative sidestand??? |
Thanx for response Clawman......yeah that's the idea. Your set up is the fix I need. It looks like a fab job is the only way. The only other thing I found is there is a universal dirt bike side stand that you can buy. It clamps on to square section swing arms. But I didn't really like the idea of clamping on to that aluminum arm a lot. |
Author: | TheClaw [ Thu Jan 04, 2018 10:40 pm ] |
Post subject: | Re: Innovative sidestand??? |
Mine leans over a lot. Looks a little uncomfortable. It works. Will likely take it off for track days. Its bolted to the engine, not the swing arm. Nothing wrong with a generic side stand and modifying it. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |