| Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
| OEM fairing screws http://ducatittandf1.com/viewtopic.php?f=24&t=11642 |
Page 1 of 1 |
| Author: | Cal [ Tue Oct 03, 2017 10:01 am ] |
| Post subject: | OEM fairing screws |
Does any have an OEM slotted fairing screw that I can buy, or know of a source. I think those are m6X18 or 20. The black big head doohickies. Thanx, Clay |
|
| Author: | pantah_good [ Tue Oct 03, 2017 10:10 am ] |
| Post subject: | Re: OEM fairing screws |
How about these? https://store.bevelheaven.com/Body-Dress-Up-etc/Bodyscrew-6-x-17.5mm-22mm-Head-Black/ |
|
| Author: | 618F1 [ Tue Oct 03, 2017 11:21 am ] |
| Post subject: | Re: OEM fairing screws |
That part is as good as it gets now! Perfect. MikeV |
|
| Author: | Cal [ Tue Oct 03, 2017 3:31 pm ] |
| Post subject: | Re: OEM fairing screws |
How'd you find those....I actually went there to look but when I searched I some how missed those. Those are about as good as it gets...... Thanx much I will order a couple, Clay |
|
| Author: | pantah_good [ Tue Oct 03, 2017 4:32 pm ] |
| Post subject: | Re: OEM fairing screws |
Steve must have just got them in stock. I knew he had the silver ones, and figured he'd be getting them in black before long. I can't remember - was an Allen socket version of the black ones ever used on any Pantahs? (needing help again Lou..) |
|
| Author: | ducttf1 [ Tue Oct 03, 2017 8:55 pm ] |
| Post subject: | Re: OEM fairing screws |
Hey Bill, without looking in a book I can't remember them using Allen heads. I don't think they did for a long time. I remember back in the day changing hex heads to allens to make my bike look cooler! I think it went faster too.Lou |
|
| Author: | 618F1 [ Tue Oct 03, 2017 11:20 pm ] |
| Post subject: | Re: OEM fairing screws |
They were the screwdriver type. That makes it much easier to have them slide out and scratch the original paint. MikeV |
|
| Author: | pantah_good [ Wed Oct 04, 2017 8:00 am ] |
| Post subject: | Re: OEM fairing screws |
That's why I must have been dreaming about the Allen headed one I thought I remembered. |
|
| Author: | ducttf1 [ Wed Oct 04, 2017 10:08 am ] |
| Post subject: | Re: OEM fairing screws |
You are correct Mike. I use two tools for that purpose. A Dzus fastener tool (Snoopy tool) or I made a small screwdriver with rounded edges. No more scratched paint. Lou |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|