Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://ducatittandf1.com/

Ducati/cagiva hi comp pistons
http://ducatittandf1.com/viewtopic.php?f=24&t=11201		 Page 3 of 3
Author:  boucher [ Mon Oct 26, 2015 4:40 am ]
Post subject:  Re: Ducati/cagiva hi comp pistons
Thanks for everyone's input. I'll check both heads and pistons and work out the comp ratio. Boucher.
Author:  618F1 [ Mon Oct 26, 2015 11:15 am ]
Post subject:  Re: Ducati/cagiva hi comp pistons
And this is where a good book about mechanical mathematics, or even simple hot-rodding, really helps. MikeV
Author:  boucher [ Tue Nov 03, 2015 2:34 am ]
Post subject:  Re: Ducati/cagiva hi comp pistons
Thanks Mike , Palmer. I cc'd combustion chamber with engine assembled. I measured 29ml which is about 13.9:1 comp ratio. (With 1.00mm squish) A bit too high. Will check it again once the larger valves are installed. Boucher.
Author:  Carlo [ Tue Nov 03, 2015 8:41 am ]
Post subject:  Re: Ducati/cagiva hi comp pistons
boucher wrote:
Thanks Mike , Palmer. I cc'd combustion chamber with engine assembled. I measured 29ml which is about 13.9:1 comp ratio. (With 1.00mm squish) A bit too high. Will check it again once the larger valves are installed. Boucher.

:shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:
Author:  Carlo [ Tue Nov 03, 2015 8:43 am ]
Post subject:  Re: Ducati/cagiva hi comp pistons
Squish 1,2 .... 11,9 : 1 for me is ok! ;) for me....... Ciao!!!
Page 3 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/