Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
Oil Cooler O-Ring http://ducatittandf1.com/viewtopic.php?f=23&t=11353 |
Page 1 of 1 |
Author: | frankfast [ Sun May 22, 2016 1:51 pm ] |
Post subject: | Oil Cooler O-Ring |
The rubber o-rings that hold up the oil cooler on my Laguna broke a long time ago. I've used heavy rubber bands but they don't take the heat and break. I see that Bevel Heaven sells o-rings that hold down the rear of fiberglass tanks on the old 750 SS but they are expensive and I'm not sure they are the right length. Anybody have an alternative? |
Author: | ducttf1 [ Sun May 22, 2016 3:15 pm ] |
Post subject: | Re: Oil Cooler O-Ring |
You can find o-ring suppliers on the internet, like McMaster-Carr and just order a size that corresponds to the old one on your Laguna. I think they have some fairly large sizes. Hope this helps. Lou |
Author: | frankfast [ Sun May 22, 2016 6:07 pm ] |
Post subject: | Re: Oil Cooler O-Ring |
Thanks Lou. Good source for a lot of stuff. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |