TT2 Tank Photos

johnnybravo12 · **Joined:** Wed May 30, 2018 3:02 pm **Posts:** 51

Could some of you kind people post a photo or 2 of the bottom of a TT2 tank for a bike with both carbs in the middle. I’m trying to see what the shape is and where the fuel taps go.

Thanks
John

huit · **Joined:** Sat Oct 29, 2011 3:38 pm **Posts:** 806

I had one not a full view hopefully enough.
Paul
Ps I am using short intakes and 36mm carbs

johnnybravo12 · **Joined:** Wed May 30, 2018 3:02 pm **Posts:** 51

Thanks Paul! Would you have a photo of what the bottom profile is? I’m thinking a view from the side. I have an aluminum TT2 tank that I have to modify the bottom to clear the rear carb and I’m trying to see what all I need to do. Thx. John.

618F1 · **Joined:** Thu Oct 14, 2010 11:23 am **Posts:** 1830

Attachment:

aIM007846.JPG [ 458.6 KiB | Viewed 772 times ]

flattop900 · **Joined:** Tue Mar 18, 2014 10:03 am **Posts:** 370

Hi Mike.... Any info on the rear "MQ" caliper on this bike?
Thanks...
Flattop

618F1 · **Joined:** Thu Oct 14, 2010 11:23 am **Posts:** 1830

It is a one-off I bought many years ago, and is now in a box. I thought it said BM, and was a Brembo part. It is the triangular style, with a CNC'd carrier and the rod. For a 900SS etc. Future plans for it. MikeV

flattop900 · **Joined:** Tue Mar 18, 2014 10:03 am **Posts:** 370

Thanks Mike.... I was trying to make a correlation between Brembo and MQ (Motorquality). Cycle Brakes web site had a picture of the MQ caliper in their description of the Brembo F04 caliper. Motorquality is now described as being a distributor of high-end merchandise. May at one time have been a manufacturer. Wondering if their caliper and the Brembo may have come out of the same factory at some time in the past. Do you happen to remember the thickness of the rotor mounted on the bike?
Flattop

TT2 Tank Photos

Who is online