Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
Oil pump gear http://ducatittandf1.com/viewtopic.php?f=10&t=11721 |
Page 1 of 1 |
Author: | boucher [ Fri Jan 19, 2018 3:57 am ] |
Post subject: | Oil pump gear |
Hi Ducati knowledge people, does a Ducati f1 dry clutch share a different oil pump gear? The pantah pump gear is 44T The primary drive is 22T. The f1 is 30T on primary drive. What do I need for the oil pump gear (no of teeth/model) Thanks Boucher. |
Author: | flattop900 [ Fri Jan 19, 2018 9:31 am ] |
Post subject: | Re: Oil pump gear |
Good morning Mr.Boucher... I asked the same question earlier this year. The number MikeV posted was 58. Search "oil pump" and you will see other combinations that Mike posted. I found it easier and just as economical to purchase the entire pump assembly. Regards... Flattop |
Author: | ducttf1 [ Fri Jan 19, 2018 11:56 am ] |
Post subject: | Re: Oil pump gear |
Also note that the early pantah oil pump housings will not clear the later straight cut gears that are a larger diameter. You will see that all the later pump housings have a crescent shaped notch machined on the top of the them to clear the gear. Lou |
Author: | 618F1 [ Fri Jan 19, 2018 12:40 pm ] |
Post subject: | Re: Oil pump gear |
Look for the March 22, 2017 postings in tt2 technical section Boucher, started by flattop. MikeV |
Author: | 618F1 [ Fri Jan 19, 2018 12:40 pm ] |
Post subject: | Re: Oil pump gear |
Look for the March 22, 2017 postings in tt2 technical section Boucher, started by flattop. MikeV |
Author: | ducttf1 [ Fri Jan 19, 2018 3:06 pm ] |
Post subject: | Re: Oil pump gear |
As always, when in doubt ask Mike V! Lou |
Author: | boucher [ Fri Jan 19, 2018 5:20 pm ] |
Post subject: | Re: Oil pump gear |
So I'm after a oil pump with a 58t to run against the 30t primary drive. Thanks Boucher. |
Author: | 618F1 [ Fri Jan 19, 2018 8:51 pm ] |
Post subject: | Re: Oil pump gear |
Maybe. Depends. MikeV |
Author: | Palmer [ Mon Jan 22, 2018 11:00 am ] |
Post subject: | Re: Oil pump gear |
From experience, try and keep the primary and oil pump gears as an original set, swapping gears can sometimes generate a LOT of engine noise even thought the gear teeth look identical. Palmer |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |