Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://ducatittandf1.com/

campagnolo rotor types
http://ducatittandf1.com/viewtopic.php?f=10&t=11693
Page 1 of 1

Author:  agshark [ Sun Dec 10, 2017 6:05 pm ]
Post subject:  campagnolo rotor types

Hi

i have 2 rear campagnolo with menani type cush on them but i am seeing which rear rotors were on them

sizes are 16 x 4 rotor needed is 260mm od 60mm id 80mm pcd 6 hole
18 x 3.5 rotor needed is 260mm od 65mm id 80mm pcd 6 hole

Thanks Jon

Author:  618F1 [ Sun Dec 10, 2017 9:47 pm ]
Post subject:  Re: campagnolo rotor types

Hard to decipher this, but sounds like early tt2 and Yamaha patterns. Carlo has two nice (solid and floating) 260mm rear rotors with 60mm ID and 80mm bolt pattern. 65/80 sounds odd; more common is 63 and 64 mm ID. But, again, you could open up one of the 60mm to what you need. MikeV

Author:  agshark [ Sun Dec 10, 2017 11:42 pm ]
Post subject:  Re: campagnolo rotor types

Hi Mike

Thanks For that, Lou said someone would know straight away. Funny size the 65mm id he thought TZ as well

Thanks Jon

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/