Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
campagnolo rotor types http://ducatittandf1.com/viewtopic.php?f=10&t=11693 |
Page 1 of 1 |
Author: | agshark [ Sun Dec 10, 2017 6:05 pm ] |
Post subject: | campagnolo rotor types |
Hi i have 2 rear campagnolo with menani type cush on them but i am seeing which rear rotors were on them sizes are 16 x 4 rotor needed is 260mm od 60mm id 80mm pcd 6 hole 18 x 3.5 rotor needed is 260mm od 65mm id 80mm pcd 6 hole Thanks Jon |
Author: | 618F1 [ Sun Dec 10, 2017 9:47 pm ] |
Post subject: | Re: campagnolo rotor types |
Hard to decipher this, but sounds like early tt2 and Yamaha patterns. Carlo has two nice (solid and floating) 260mm rear rotors with 60mm ID and 80mm bolt pattern. 65/80 sounds odd; more common is 63 and 64 mm ID. But, again, you could open up one of the 60mm to what you need. MikeV |
Author: | agshark [ Sun Dec 10, 2017 11:42 pm ] |
Post subject: | Re: campagnolo rotor types |
Hi Mike Thanks For that, Lou said someone would know straight away. Funny size the 65mm id he thought TZ as well Thanks Jon |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |