My TT1 has a Paso bottom end which is mated to Pantah heads ...
The Pantah parts manual shows that the inlet manifolds are secured by Nyloc nut (51); capped washer (50); a steel sleeve (49) and a rubber washer/sleeve (48)
Attached is a picture showing these parts.
Whilst undertaking some work on the heads recently I found that the rubbers on the vertical head have disintegrated.
These rubbers have a distinguished shoulder and would be very hard to replicate (certainly for me ...!)
I have trawled the internet but am finding it difficult to locate replacements anywhere ....
I would very grateful if somebody could direct me in the correct direction or suggest a suitable alternative ....
Many thanks
Tom
Attachment:
IMG_0034.JPG [ 63.89 KiB | Viewed 1123 times ]
Attachment:
IMG_0034.JPG [ 63.89 KiB | Viewed 1123 times ]