Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
Tt2 camshaft specs/epicycle twin. http://ducatittandf1.com/viewtopic.php?f=10&t=11359 |
Page 1 of 1 |
Author: | boucher [ Sat Jun 04, 2016 5:25 am ] |
Post subject: | Tt2 camshaft specs/epicycle twin. |
Hi, as I'm working on the old epicycle twin, pete smith said in a conversation that the cams in it are factory Ducati. I understand that they are the same specs as tt2 cam shafts. (Totally different lobes to standard) What I would like to know what would the cam specs/ degrees be for such a cam? (At 1mm lift) Are tt2 factory cams the same as ncr7 cams. The cyl head is slightly higher than standard and I might have to off set key timing? Any knowledge on subject would be appreciated . Boucher |
Author: | nick gill [ Sun Jun 26, 2016 11:16 pm ] |
Post subject: | Re: Tt2 camshaft specs/epicycle twin. |
boucher wrote: Hi, as I'm working on the old epicycle twin, pete smith said in a conversation that the cams in it are factory Ducati. I understand that they are the same specs as tt2 cam shafts. (Totally different lobes to standard) What I would like to know what would the cam specs/ degrees be for such a cam? (At 1mm lift) Ian Faloon mentions the cam durations but you'd need to measure some to know the centrelines and true profile. http://pics.domdummaste.net/ducati/r_pantahs.html |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |