Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://ducatittandf1.com/ |
|
project of small spark plug http://ducatittandf1.com/viewtopic.php?f=10&t=11349 |
Page 1 of 1 |
Author: | flattop900 [ Mon May 16, 2016 12:43 pm ] |
Post subject: | Re: project of small spark plug |
Perfetto !!! Thank you for spending the time to show me your system. Bellissimo! Best Regards... Flattop900 |
Author: | Carlo [ Mon May 16, 2016 4:31 pm ] |
Post subject: | Re: project of small spark plug |
no problem, a disposal!! flattop900 wrote: Perfetto !!!
Thank you for spending the time to show me your system. Bellissimo! Best Regards... Flattop900 |
Author: | Eldert [ Tue May 17, 2016 4:02 am ] |
Post subject: | Re: project of small spark plug |
there is plenty of room to re locate a small 10 mm sparkplug higher up in the combustion chamber . this is a picture of a 450 cilinderhead i had on my computer no need for duel plugging Eldert |
Author: | flattop900 [ Tue May 17, 2016 12:49 pm ] | ||
Post subject: | Re: project of small spark plug | ||
I'm getting into a modified engine for the first time. The chambers are ported very deep and the number of plug threads left are few. The plug was actually shimmed up around .150". The brass inserts will get back the missing threads, keep the plug off the piston and eliminate the shim. Thanks for the reply and nice picture. Better looking than mine! Flattop900
|
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |