Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://ducatittandf1.com/

A serious question on a phm!
http://ducatittandf1.com/viewtopic.php?f=10&t=11256		 Page 1 of 1
Author:  boucher [ Fri Nov 20, 2015 4:56 am ]
Post subject:  A serious question on a phm!
Hi All, Just a quick question did rossi kick him? No that's not it , So what I'm hearing is the difference between a set of phm 38mm and a set of malossi 40mm is the size of the bore/choke and no accerator pumps/blanking plates. I like beer and Friday nights. Boucher!!!
Author:  pantah_good [ Fri Nov 20, 2015 9:59 am ]
Post subject:  Re: A serious question on a phm!
What engine oil should I use...wait..... one more thing anyway, Malossi's have bigger o.d., longer, and much stronger slide return springs. I suspect there are other not so obvious differences as well. 38's better for torque??
Enjoy yourself tonight Boucher.
Bill
Author:  618F1 [ Fri Nov 20, 2015 12:42 pm ]
Post subject:  Re: A serious question on a phm!
The guts (slides, [bigger softer] springs, and spring tops) of a Malossi are quite different, as well as the obvious differences on the outside (plunger chokes, pumps removed and blanked, and big bellmouths added). Many do not have idle speed adjustment screws. Here are a few shots of a good example:

Attachment:
Malossi 42mm ei.jpg
Malossi 42mm ei.jpg [ 54.06 KiB | Viewed 814 times ]


Attachment:
Malossi 42mm ed.jpg
Malossi 42mm ed.jpg [ 52.03 KiB | Viewed 814 times ]


Attachment:
Malossi 42mm ef.jpg
Malossi 42mm ef.jpg [ 53.44 KiB | Viewed 814 times ]


Attachment:
Malossi 42mm ea.jpg
Malossi 42mm ea.jpg [ 54.65 KiB | Viewed 814 times ]
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/